Buying a rifle or rifle represents a certain investment. It must therefore be maintained so that it lasts as long as desired.

When purchasing a gun, it is important to purchase a copper brush of the correct size for your barrel at the same time. Also acquire a good quality cleaning rod, sufficiently rigid, to ensure good control during the various operations. The gun cleaner spray is important in this case.

Maintenance products

The owner should also take the opportunity to obtain solvent, oil and a drying product, such as the Shot gun cleaner from Remington. The latter, little known and used, allows for a good preparation and transition between each cleaning step.

Fans who own a rifle should also opt for 40-X Bore cleaner. It is very useful for dissolving all copper deposits inside the grooves of the barrel. For rifles, there are options such as Brite boron solvent which have the task of removing all traces of plastic left by the passage of the wads.

The use of small square cotton cloths is recommended to properly remove excess protective oil and various other products. In addition to being resistant, they leave little residue, while offering superior absorption.

Clean in the direction of the ball

When you fire your gun, powder residue and dirt get embedded in the barrel, while the chamber and receiver remain relatively clean. If you run a brush through the end of the muzzle of the gun, you push dirt, residue, and moisture into the chamber and receiver. This error is a major cause of jamming problems with autoloading rifles and shotguns. If you push or pull a brush towards the chamber, you will notice that the brush will throw debris from the bore into the chamber and the locking tabs. Use a cleaning cord, making a movement going in the natural direction of the ball. The gun cleaner spray solvent is perfect cleaning choices in this case.

Choose the Best Choices

Then proceed to cleaning the other parts of the weapon, always with a brush and solvent. Then wipe off excess solvent and any residue with a clean cloth. Finally, lubricate the moving parts sparingly, so as not to retain residues and promote clogging. Use a cotton swab for hard-to-reach places.

The cleaning being now finished, you can reassemble the weapon after a last blow of the microfiber cloth. If your weapon has a wooden stock, consider protecting it by applying a nourishing wax. And don’t forget to clean your optics thoroughly! Specialized products exist to remove fingerprints and dust.

The process of cleaning a gun is simple, but it can be time consuming. If you find manual cleaning too tedious, try the ultrasonic cleaner, be careful, it will not exempt you from the step of disassembly and lubrication.

Conclusion

Cleaning and maintaining a weapon are closely linked. Indeed, cleaning is the ideal time to check the general condition of your weapon. If you ever detect a malfunction, do not hesitate to contact a gunsmith who will take care of the repair. In addition, a perfectly maintained weapon will be easier to resell.

Clare Louise